Wire China Expo 2018-DIAMONDWK



1. Introduction of Exhibits Product- PCD Blank
Polycrystalline diamond, abbreviated as PCD, normally called PCD blank, which is made by synthetic diamond micron powder at the high temperature and pressure sintering production environment.
Features:
  • Be used for drawing many different varieties of material, gold wire, copper wire, iron wire, steel wire, aluminum wire, etc;
  • Based on the applications of wire drawing, the average grain sizes of diamond grain: 1 um, 3 um, 5um, 10 um, 25 um, 50um;
  • Available for lots types of wire drawing operation, from rod-size to fine-size;
  • Unsupported wire die blanks. Supported wire die blanks;
  • Coblat-bond PCD blanks. Sillicon-bond PCD blanks;
  • Can be used for wet and dry drawing applications;
  • Good finish surface;
  • Good wear resistance.











2. Introduction of Wanke
  • The manufacturer with 28 years rich experience
  • High-tech enterprise based diamond products
  • Plant areas more than 124000 m2
  • 8 standard workshops, 1 research building, 1 office building






 3. Introduction of Wire China

Wire China has its debut in 2004 and has be recognized as the largest trade fair for its industry in Asia. With 16 years of experience, wire China has grown into Asia's most influential, and the world's second most influential wire industry event.
  • 1,645 Exhibitors
  • 42,199 Buyers
  • 97,000 m² Exhibition Space
  • 84% Exhibitors Rebooking Rate
Welcome to visit us warmly, wait for you at Wire China Booth W3A12!
Contact: Maan Shao
Cell: 0086 13027628261
Email: admin@diamondwk.com




Wire China Expo 2018 ---- DIAMONDWK - News - Henan Wanke Diamond Tools Co.,Ltd
http://www.diamondwk.com/news/wire-china-expo-2018-diamondwk-17437799.html

评论

发表评论

此博客中的热门博文

The development of China PDC bit for oil drilling

图片
China began to introduce PDC bits since the early 1980s. After the 1990s, major oil fields began to use PDC bits and achieved good results. Although PDC bits have many advantages and are widely used, the hydraulic problems of PDC bits are even more pronounced than other bits: On the one hand, PDC bits break the rock in a shear manner, and the drilling speed is fast. A large amount of cuttings needs to be removed in time; On the one hand, the temperature Sensitive PDC cutters require rapid cooling. If the clear rock and cooling effect are insufficient, it will not only cause bits of mud, repeated cutting, resulting in a sharp decline in the penetration rate, but also will make the PDC cutting teeth rapidly wear out in the bottom of the high temperature environment, which will seriously affect the use of PDC bit life. Therefore, research and improvement of the effect of PDC bit bottom hydraulics has always been one of the most concerned issues for PDC bit researchers and users. ...
阅读全文

How does a PDC bit work?

图片
Everyone in the work and study, there will be a process, learning and work are also methods, so people in the daily life of the product will have its own working principle, PDC bit is the same, let's see how it works. The PDC bit is mainly based on the cutting teeth installed on the body of the bit. However, these cutting teeth also have two kinds of structure, which are the composite cutting teeth and the tooth column. The diamond composite cutting teeth are mainly formed by welding the composite sheets directly into the reserved grooves above the drill body, so it is usually used in the carcass bit. The tooth column cutting teeth are mainly welded to the tungsten carbide column, which will be embedded in the tooth column or in the teeth that are welded on the body of the bit. It is usually used in the steel bit, and some of them are used in the PDC bit of the matrix. DIAMONDWK is a highly professional manufacturer in PCD & PDC field. Our main products are P...
阅读全文